Sauder 420650 Manual Del Usuario página 20

Step 16 Step
Fasten the REAR RIGHT TUBE (CC) to the LARGE LEFT END (B). Tighten
å
one BLACK 1-3/8" HEX HEAD SCREW (16) using the L-Wrench (14).
Fasten one METAL BRACKET (8) to the LARGE UPRIGHT (E) and REAR
å
RIGHT TUBE (CC) exactly as shown. Tighten two BLACK 1/2" HEX HEAD
SCREWS (20) using the L-Wrench (14).
Fasten one METAL BRACKET (8) to the LARGE UPRIGHT (E) and FRONT
å
RIGHT TUBE (BB) on the SMALL TOP (F) exactly as shown. Tighten two
BLACK 1/2" HEX HEAD SCREWS (20) using the L-Wrench (14).
14
BLACK 1-3/8" HEX HEAD SCREW
(1 used in this step)
Page 20
B
16
www.sauder.com
BLACK 1/2" HEX HEAD SCREW
(4 used for the METAL BRACKETS)
BB
F
E
CC
Edge with hole
Elongated hole
20
8
420650