Publicidad
Step 18
Step
Carefully fl ip the SMALL RIGHT END (C) over.
å
Fasten one EXTENSION RAIL (1) to the SMALL RIGHT END (C).
å
Use three BLACK 1/2" PAN HEAD SCREWS (22).
NOTE: For each EXTENSION RAIL, turn a SCREW into the hole
å
shown in the enlarged diagram. Then, slide the inner cartridge of
the EXTENSION RAIL in to fi nd the other hole that lines up with
the hole in the END. Turn a SCREW into this hole.
Open end
Page 22
Open end
1
www.sauder.com
1
Use these holes.
BLACK 1/2" PAN HEAD SCREW
(3 used in this step)
The CAM SCREWS
should be here.
C
22
420650
Publicidad
