Starting Operation - Würth AL 30-CV-LI Traducción Del Manual De Instrucciones De Servicio Original

OBJ_BUCH-2060-001.book Page 8 Monday, September 23, 2013 11:43 AM
Product Features
The numbering of the product features refers to the illustration
of the charger on the graphics page.
1 Battery pack*
2 Green battery charge indicator
3 Red battery charge indicator
4 Charging compartment
*Some accessories shown or described are not part of
the standard delivery scope of the product.
Tool Specifications
Battery Charger
Art. No.
Output voltage (automatic voltage
detection)
Charging current
Allowable charging temperature
range
Charging time for battery
capacity, approx.
– 1.3 – 1.5 Ah
– 2.0 Ah
– 2.6 – 3.0 Ah
– 4.0 Ah
Number of battery cells
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given apply for nominal voltages [U] of 220/230 V.
Chargers marked with 230 V can also be operated with 220 V.

Starting Operation

 Observe the mains voltage! The voltage of the
power source must correspond with the data on the type
plate of the battery charger.
Charging Procedure
The charging procedure starts as soon as the mains plug of
the battery charger is plugged into the socket outlet and the
battery 1 is inserted into the charging compartment 4.
Due to the intelligent charging method, the charging condition
of the battery is automatically detected and the battery is
charged with the optimum charging current, depending on
battery temperature and voltage.
This gives longer life to the battery and always leaves it fully
charged when kept in the charger for storage.
Meaning of the Indication Elements
Flashing Green Battery Charge
Indicator 2
Note: The rapid-charging procedure is only possible when
the battery temperature is within the allowable charging tem-
perature range, see section "Tool Specifications".
Continuous Lighting of the Green
Battery Charge Indicator 2
AL 30-CV-LI
0700 816
Additionally, a signal tone sounds for approx. 2 seconds,
V 10.8 – 18
which acoustically indicates that the battery is fully charged.
A 6,0
Afterwards, the battery can be removed for immediate use.
When the battery is not inserted, continuous lighting of
°C 0 – 45
the battery charge indicator 2 indicates that the mains plug is
inserted in the socket and that the battery charger is ready for
(80 %) 100 %
operation.
min (10) 25
min (15) 35
Continuous Lighting of the Red Battery
min (20) 35
Charge Indicator 3
min (30) 45
3 – 10
kg 0.8
/ II
"Tool Specifications". As soon as the allowable charging tem-
perature range is reached, the battery charger automatically
switches to rapid charging.
Flashing Red Battery Charge Indicator 3
The rapid-charging procedure is signalled
by a flashing green battery charge indi-
cator 2.
Continuous lighting of the green bat-
tery charge indicator 2 indicates that the bat-
tery is fully charged.
Continuous lighting of the red battery
charge indicator 3 indicates that the temper-
ature of the battery is not within the allowa-
ble charging temperature range, see section
A flashing red battery charge indicator 3
indicates a different malfunction of the
charging procedure, see section "Trouble-
shooting – Causes and Corrective Meas-
ures".
8