Starmix NSG Serie Instrucciones Para El Manejo página 14

en
2 Before the irst start-up
Assembly
See Fig. B.
1. When unpacking, make sure everything is complete.
2. Immediately report any transport damage to the retailer.
3 Operaion
Before every use, please note
Make sure that the following condiions are met:
r Vacuum cleaner, mains connecion cable and sucion hose are not damaged.
r All ilters have been inserted and are not damaged.
Operaing modes
Operaing mode (depending on equipment)
Of
On
Minimum sucion power
Maximum sucion power
Standby mode for automaic switch-on,
ininitely adjustable speed control ECO-MAX
Standby mode for automaic switch-on,
ininitely adjustable speed control ECO-MAX,
automaic ilter cleaning
Suck up dry materials
Tools required
Main ilter (ilter cartridge)
Filter bag for dust-free disposal of ine-grained
material to be sucked up
Accessories depending on the area of
applicaion
1. Set required operaing mode on the switch.
9 Vacuum cleaner is ready for vacuuming.
2. To adjust the sucion power, select from the following opions (depending on equipment):
– Move switch to ECO posiion
– Set speed on the switch
14
Descripion
Wall socket under voltage
Wall socket under voltage, manual
operaion
Vacuum cleaner operates at low power
Vacuum cleaner operates at maximum
power
Vacuum cleaner is switched on and of
by the electrical tool
If the sucion power drops, the ilter
is cleaned in breaks between work (=
switched of electrical tool)
Notes
Vacuum cleaner, ilter and accessories need to be dry.
If frequently changing between wet and dry vacuuming, use
a separate main ilter.
When vacuuming soot, cement, plaster, lour or similar
dusts: Insert a ilter bag in the dirt container so that the
dust does not sick and or cake.
Switch posiion
0
I
ECO
MAX
A