Starmix NSG Serie Instrucciones Para El Manejo página 15

– Set auxiliary air slide on the handle tube
Suck up liquids
Volume of liquid
Small volume of liquid
Large volume of liquid
1. Remove ilter bag from the dirt container before sucking up liquids.
2. Slightly open auxiliary air slide on the handle.
3. Move switch to posiion I.
Before switching of the vacuum cleaner:
1. Remove sucion nozzle from the liquid.
9 Residual water in the sucion hose is sucked into the container and cannot leak out.
If the loaing valve disrupts the sucion process when the container is full:
1. Switch vacuum cleaner of.
2. Empty dirt container and ilter cartridge.
Connect an electrical tool
See Fig. C.
Use socket on vacuum cleaners with automaic switch on/of (switch posiion A) to connect electrical tools. The
vacuum cleaner is switched on and of by the electrical tool. In switch posiion 0, the socket can be used as an
extension cable, e.g. for a light.
Connecion value: Vacuum cleaner + electrical tool = max. 16 A (value depends on the country version, pay
atenion to technical data).
WARNING!
The socket on the vacuum cleaner is always live.
Risk of injury due to electrical tool automaically staring up.
1. Before plugging in: Switch of electrical tool.
Smart Stop
See Fig. D.
Apply brake to prevent the vacuum cleaner from rolling away.
Blowing funcion
See Fig. E.
Only use the blowing funcion for cleaning, removing dust from and drying machines and appliances.
Ater work
See Fig. F.
1. Roll up mains connecion cable and sucion hose.
2. Store the accessories in the accessories holder.
Tools required
Main ilter (ilter cartridge)
Water nozzle
Main ilter (foam)
Water nozzle
en
15