Final Gear Oil - Yamaha GRIZZLY Manual Del Propietário

1. Filler bolt
2. Correct oil level
1. Boulon de l'orifice de remplissage
2. Niveau d'huile correct
1. Perno del orificio de llenado
2. Nivel de aceite correcto
1. Bolt (× 2) 1. Boulon (× 2)

Final gear oil

Final gear oil measurement
Be sure no foreign material enters the final
gear case.
Final gear oil replacement
1. Perno (× 2)
8-25
1. Place the machine on a level place.
2. Remove the oil filler bolt and check the oil
level. It should be up to the brim of the
hole. If the level is low, add oil to raise it to
the proper level.
CAUTION:
3. Install the oil filler bolt and tighten to the
specified torque.
Tightening torque:
Oil filler bolt:
23 Nm (2.3 m·kg)
1. Remove the final gear case cover.
2. Place the machine on a level place.
3. Place a container under the final gear
case.
EBU00705