Leg
Pin
Back Rail
2. Assemble the Legs
Remove the drawer from the lower vanity section. Refer to the
"Service the Drawers" section for proper removal.
Back Rail
Position the two leg assemblies on each side of the drawer
assembly with the pins facing each other.
Slide one set of pins on the leg into the back rail. Repeat with the
other side.
Front Rail
Slide one set of pins on the leg into the front rail. Repeat with the
other side. (1)
Rotate the front rail toward you. (2)
Firmly push the front and back rail down.
Kohler Co.
1
2
Front Rail
5
1082745-2-A