Kohler K–2515 Guia De Instalacion página 9

Slide
Slide
Carriage
6. Service the Drawers
Install Knob
From the inside of the drawer, insert the bolt through the knob
hole.
Thread the bolt in the knob.
Holding the knob in place with your hand, tighten the bolt with a
flat-blade screwdriver.
Remove the Drawer
Slide the drawer out on the slides until fully extended.
Pull the right side release latch down, and push the left side
release latch toward you. Pull the drawer toward you until the
slides separate.
Reinstall the Drawer
Fully extend the slides.
Align both slides on the drawer with both carriages on the vanity.
Slide the drawer to the closed position.
Kohler Co.
Bolt
9
Release
Latch
Knob
1082745-2-A