Transport And Storage - Bosch Rexroth SB356 Manual Del Usuario

28/124
Label area
A label area that can be used to identify the
unit is provided on the system box (unit
number in circuit diagram). The individual
slots for the tightening channels are identified
by a label (SE1/2, LT1, etc.).
LT3 LT4
Fig. 2: Label area within the SB356
Safety warning
A safety warning is printed next to the label
area. It warns against the high electrical
voltages in the system box during operation
and provides maintenance information (see
"Disassembly and replacement" on page 39).
Ring bolts
They are used to fasten the system box when
moving the box with a crane.
Lock
The lock is used to prevent the system box
door from being opened.
Mains switch
The system box is switched on or off with the
mains switch.
Bosch Rexroth AGSB356 | 3 609 929 B67/2008-11
5
For storing and transporting the product,
always observe the ambient conditions
specified in the technical data (see
"Technical data" on page 41).
When transporting SB356 system boxes,
suitable transport safety devices must be
SE5/6 LT5
used depending on the position of transport.

Transport and storage