K2 Pumps SWG20001DBK Manual Del Proprietário página 4

IMPORTANT!
Prior to installation, record Model Number, MFG Date, Amps, Voltage, Phase and HP, from pump name plate for future
reference. Also record the Voltage and Current Readings at Start up:
SPECIFICATIONS
PUMP
DISCHARGE
LIQUID
TEMPERATURE
VOLUTE
MOTOR HOUSING
SEAL PLATE
IMPELLER
SHREDDING RING
CUTTER
SHAFT
SEAL
UPPER BEARING
LOWER BEARING
MOTOR
SINGLE PHASE
NOTE: Consult factory before making modifications as they may effect CSA
listing.
Description
Designed to reduce domestic, commercial, institutional and light industrial
sewage to a finely ground slurry.
SPECIFICATIONS
MODEL
SWG20001DBK
SWG20001LSK
4
1-1/4" NPT Vertical, Bolt-on Flange
140°F Intermittent
Cast Iron, Class 30
Cast Iron, Class 30
Cast Iron, Class 30
10 Vane, Vortex, Cast Iron, Class 30
Alloy Steel
Alloy Steel
Stainless Steel
Seal Face: SiC/SiC (Pump liquid side)
SiC/Carbon (Motor side)
Single row, Ball, Oil Lubricated
Single row, Ball, Oil Lubricated
Oil Filled, Squirrel Cage Induction,
Class B Insulation
Capacitor Start/Capacitor Run. Includes overload protection in the motor.
HP Hz Volts
2 60 230
2 60 230
Full Load
RPM
Amps Rotor Amps
15.0
3450
3450 15.0
For Professional Technical Support call 1-844-242-2475
NEMA
Locked Cord
Start
Type
Code
62.0 B SJOW
62.0 B SJOW
Cord
Size
14/3
14/3