Sanus VP1 Manual Del Usuario página 12

2-2
Hanging Tube and Plate Cover
1. Carefully screw threaded tube [04] or [05] into ceiling plate until tube
either contacts the ceiling or is fully threaded into plate [01].
2. Insert tube locking screw [19] into plate [01] and tighten securely
with hex key [16].
CAUTION:
DO NOT OVERTIGHTEN!
Overtightening of set screw can damage threads on pipe.
3. Press plate cover [02] or [03] onto ceiling plate [01].
2
[01]
[19]
[04], [05]
12
[16]
[16]
[19]
1
[04], [05]
3
[01]
[01]
[02],
[03]
[04], [05]
6901-002053 03