Parts Identification; Charging The Shaver - Panasonic ES-RT87 Instrucciones De Operación

Parts identification

A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Foil frame release
buttons
5 Finger rest
6 Power switch
7 Battery capacity lamp
( )
8 Charge status lamp (
9 Appliance socket
: Outer foil section
; System outer foil release
buttons
< Inner blades
= Trimmer
> Trimmer handle
 Lock release button
B Self-cleaning recharger
@ Arm
A Charging terminal
B Cleaning liquid unit
removal button
12
C Self‑cleaning recharger
socket
 Lock release lever
E Cleaning liquid filter
 Water maximum line
 Cleaning liquid unit
H STATUS lamp
I AUTO lamp
J SELECT button
C AC adaptor (RE7-59)
) (The shape of the AC
adaptor differs depending
on the area.)
K Adaptor
L Power plug
M Cord
N Appliance plug
Accessories
D Cleaning brush
E Special detergent
(Detergent)
F Operating Instructions
G Guarantee Card

Charging the shaver

Charging using the self-cleaning recharger
Thoroughly wipe off any drops of water on or around the self‑
cleaning recharger so that it is dry before charging the shaver.
1
1
Insert the appliance plug
[CN] into the self-cleaning
recharger [B].
2
2
Pull up the arm until it clicks.
3
3
Remove the protective cap
[A1] and then attach the
shaver.
• Turn the shaver off before attaching.
• Check that the system outer foil is not deformed or
damaged when you are attaching the shaver.
• Put shaver into the self‑cleaning recharger with the
trimmer handle retracted. If the trimmer handle is not
retracted, it might scratch the cleaning tray.
4
4
Push down the arm until it clicks.
5
5
Plug in the adaptor [CK] into a household outlet.
• The "Charge" mode starts when attaching the shaver.
• Check that the charge status lamp (
• Charging is completed after approx. 1 hour.
The charging time may differ with the charging capacity.
• Top‑up charging will not cause reductions in battery
performance.
2
4
3
5
1
) glows.