Cleaning with the brush
►Cleaning with the long brush
Clean the system outer
foil (a), the shaver body
(b) and the trimmer (c)
using the long brush.
►Cleaning with the short brush
Clean the inner blades [A<] using the short
brush by moving it in direction (A).
• Do not move the short brush in direction (B)
as it will damage the inner blades and affect
their sharpness.
• Do not use the short brush to clean the
system outer foil.
18
(A)
(B)
Replacing the system outer foil and the inner blades
system outer foil
once every year
inner blades
once every two years
►Removing the outer foil section
Press the foil frame release buttons [A4] and
lift the outer foil section [A:] upwards.
►Attaching the outer foil section
Securely attach the outer foil section [A:] to
the shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release
buttons [A;] and pull down the system
outer foil.
2. Insert the system outer foil until it clicks.
• Always attach the system outer foil in
proper direction.
• Always insert the system outer foil to the
foil frame when attaching to the shaver.
►Replacing the inner blades
1. Remove the inner blades [A<] one at a time.
• Do not touch the edges (metal parts) of the
inner blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they click.