After Finishing Work; Transporting; Transporting The Tiller - Stihl MH 610 Manual De Instrucciones

English
► Guide the tiller forwards and regulate the
working speed and working depth using the
blade spur.
► Move forwards slowly and in a controlled man‐
ner.
11.5 Making Furrows
► Place the front wheel in the operating position.
► Start the engine.
► Guide the tiller forwards and regulate the
working speed and working depth using the
blade spur.
► Move forwards slowly and in a controlled man‐
ner.

12 After Finishing Work

12.1 After Finishing Work
► Stop the engine.
► Allow the tiller to cool down.
► If the tiller is wet: allow the tiller to dry.
► Clean the tiller.
► Clean the hoes.

13 Transporting

13.1

Transporting the Tiller

► Switch off the engine.
16
► Detach retaining pin (1) and remove pin (2).
► Fold front wheel (3) downwards so bores (4)
align.
► Insert pin (2) through bores (4).
► Push retaining pin (1) through the bore in
pin (2).
Pin (2) is secured and front wheel (3) is in the
transport position.
► If the tiller is being transported using the front
wheel:
► Place the front wheel in the transport posi‐
tion.
► Hold the tiller by both handles and lift so it is
resting on the front wheel.
► Push or pull the tiller slowly.
► If the tiller is being transported using the run‐
ning wheels:
► Place the front wheel in the operating posi‐
tion.
► Attach the running wheels.
► Start the engine.
► Set the gear.
► Engage self-propulsion.
► Hold and steer the tiller by both handles.
12 After Finishing Work
0478-404-9902-B