Folding Handle - Mowox PM 4645 SEHW Instrucciones De Funcionamiento Originales

5. ASSEMBLY

5.1 FOLDING HANDLE

1. Fix the lower handlebars into the unit body with locking knobs, bolts and bolts as Fig. 2A,/Fig.2B/Fig2C
shown.
2. Fix the lower handlebar into the unit body with a suitable spanner (Fig. 2D). (Only for DYM1560EDQ)
3. Lift the two locking levers to release the upper handlebars for folding. (Fig.2E/2H)
4. Push the locking lever closed to lock the handlebars in the operating position. (Fig.2F/2I)
5. Adjust the tension by turning the lock nut with a suitable spanner. (Fig.2G)
6. Attach the cable-clamp to the position shown and then attach the cable. (Fig.2J/2K)
Fig.2A Fig.2B Fig.2C
Fig.2D (for DYM1560EDQ) Fig.2E Fig.2F
Fig.2G Fig.2H (for DYM1560EDQ) Fig.2I (for DYM1560EDQ)
Cable clamp
Cable clamp
Fig 2J Fig.2K
9