Starter Handle; Central Adjustment Of Working Depth - Mowox PS 4015 P-N Manual De Instrucciones

Empty the grass catcher immediately whenever full.
6.4

STARTER HANDLE

Pull the motor brake handle and slowly pull out the starter handle from the engine to
the rope guide (fig. 5). Insert it into the hook so that it remains there in you reach.
Fig.5
6.5

CENTRAL ADJUSTMENT OF WORKING DEPTH

Your scarifier is equipped with a depth adjustment lever offering a transport posi-
tion and 5 working positions (fig. 6a).
It can be adjusted to the following stages:
+5 mm
•
• -3 mm
-6 mm
•
1. Before selecting the desired operating depth, move the clutch lever to the
transport position to prevent the cutter deck from touching the ground (fig. 6b).
2. Push the height selection lever towards the wheel and move it forward and back
to adjust the depth of the tilling/ aeration roller in the ground, thus the working
depth.
transport position
16
-9 mm
•
• -12 mm
-15 mm
•
(EN)