Shark IQ ROBOT SELF-EMPTY RV1000SEU Instrucciones página 22

MAINTENANCE
CAUTION: Turn off power before performing any maintenance.
EMPTYING THE ROBOT DUSTBIN
Press the Dustbin Release Tabs and slide out the
Dustbin.
Empty debris and dust into bin.
s h a r kc l e a n . e u
To avoid spills, be sure to hold the Dustbin in an
upright position. Pinch and lift to open the lid.
Look between the filter and plastic shield and make
sure there is no debris buildup.
Remove and clean any debris build-up as needed
with a dry cloth or soft brush.
MAINTENANCE
EMPTYING THE BASE DUSTBIN
The Base Dustbin holds up to 15 days' worth of dust
and debris. Empty the bin when the debris level
approaches the max fill line.
To detach the bin, press and hold the Release
button on the top and slide out the bin.
To empty the bin, hold it over the rubbish bin, then
press the release button with the dustbin icon
on the bottom of the bin. The bin lid will open,
releasing dust and debris. Lightly tap the dustbin
against the inside of the trash receptacle to knock
off any remaining debris. Reinstall the bin by
sliding it into the slot in the base until it clicks into
place.
s h a r kc l e a n . e u