Settings, Log And Help - smith&nephew 66801280 Manual Del Usuario

EN

Settings, Log and Help

The three icons along the left of the screen access the Settings menu, the
Active Therapy Log, and the Help menu.
Settings
Log
Help
Settings
Setting contains the following user preferences, device functions and device
information. Scroll up or down to view and select menu options. Not all
settings are available in patient mode.
Alarm volume can be adjusted to low, medium or high.
Compression rate limits the target pressure change in a given period
of time to a maximum amount. The compression rate is set by your
healthcare provider based on your prescribed therapy. Do not change the
compression rate.
Change mode The device has three user modes: clinician, patient and
maintenance mode. A password is required to switch between modes. Your
healthcare provider will set the user mode. Do not change the user mode.
Language Select your desired language from the list provided.
Time zone Select the time zone for the date and time located at the top
of the touchscreen.
Flow meter indicates if there is a leak in the system. The gauge will turn
yellow if a significant leak is detected. The Flow Meter is displayed on the
leak alarm screen in the event of a leak alarm.
Restore presets restores the device settings to factory presets. Your
healthcare provider will restore preset when appropriate. Do not restore
presets.
Device information is a list of device information such as serial number,
battery charge and software information.
20