Operation; Opening/Closing The Trigger Gun; High Pressure Operation - Kärcher HD 16/15-4 Cage Manual De Instrucciones

For connection values, see type plate/tech-
nical data.
 Use a fibre-reinforced hose (not includ-
ed in standard delivery).
Minimum diameter 3/4 inch.
 Connect the hose to the water connec-
tion of the appliance.
 Connect the hose to the water tap.
Suck in water from vessel
DANGER
Never suck water from a drinking water
container.
When fitted with the appropriate accesso-
ries, this high-pressure cleaner can draw in
surface water, e.g. from water butts or
ponds (max. suction height 0.5 m).
DANGER
Never draw in fluids containing solvents or
undiluted acids and solvents! This includes
petrol, paint thinner and heating oil. The
spray mist is highly inflammable, explosive
and poisonous. Do not use acetone, undi-
luted acids and solvents, as they corrode
the materials used on the appliance.
 The standard water connection is not suit-
able for sucking in water; hence use
Kärcher suction hose (minimum diameter
approx. 1 inch) with filter (accessory).
Deaerating the appliance
 Open the water supply.
 Unscrew the nozzle.
 Press the lever on the hand spray gun.
 Switch on the appliance and let it run
until the water exiting from the spray
pipe is bubble-free.
 Switch off the appliance and fit the noz-
zle again.

Operation

DANGER
– Risk of injury! Never use the appliance
without the spray lance attached.
Check and ensure proper fitting of the
spray lance prior to each use. The
screw connection of the spray lance
must be finger-tight.
18
– If the appliance is used in hazardous ar-
eas (e.g. filling stations) the corre-
sponding safety regulations must be
observed.
– Risk of injury! The trigger and safety le-
ver may not be locked during the oper-
ation.
– Risk of injury! Contact Customer Ser-
vice if the safety lever is damaged.
– Risk of injury from high-pressure water
jet. Slide the safety catch on the trigger
gun forward before performing any
work with the appliance.
CAUTION
Clean engines only at places with corre-
sponding oil separators (environmental
safety).

Opening/closing the trigger gun

 To open the trigger gun: Actuate the
safety lever and trigger.
 To close the hand spray gun: Release
the safety lever and trigger.
Turning on the Appliance
 Open the water supply.
 Plug in the mains plug.
 Set the appliance switch to "I".
 Release the trigger gun. To do so, push
the safety catch towards the back.
 Open the hand spray gun.

High pressure operation

The appliance is equipped with the follow-
ing nozzles:.
– Power nozzle, 25° spray angle
– Rotary nozzle
Power nozzle
– Carrying out the most common cleaning
tasks
Rotary nozzle
– For strong contaminations.
– 5
EN