Maintenance; Changing The Batteries/Fuse; Fitting The Shockproof Case; Cleaning - Chauvin Arnoux C.A 6511 Manual De Instrucciones

CHANGING THE BATTERIES / FUSE
Check that no terminals are connected and that the switch is in the OFF position before
opening the instrument for safety, the instrument can only be opened if the leads are
disconnected from the terminals. Access to the fuses and the batteries is by opening the back
of the case.
Remove the shockproof case if there is one, then undo the tool release screws with a
screwdriver and the back of the case is open.
Tool release
screws
Fold away
stand

FITTING THE SHOCKPROOF CASE

In order not to damage the window protecting the display, it is preferable to first engage the
upper part of the instrument in the case, then to push the lower part in.

CLEANING

Use a soft cloth, dampened with soapy water. Rinse with a damp cloth and dry rapidly with
a dry cloth or forced air. Do not use alcohol, solvents, or hydrocarbons.

METROLOGICAL CHECK

Like all measuring or testing devices, the instrument must be checked regularly.
This instrument should be checked at least once a year. For checks and calibrations, contact
one of our accredited metrology laboratories (information and contact details available on
request), at our Chauvin Arnoux subsidiary or the branch in your country.

REPAIRS-MAINTENANCE

For all repairs before or after expiry of warranty, please return the device to your distributor.

MAINTENANCE

+
-
+
-
16
Fuse 1.6 A
+ 4 batteries
+
1.5 V LR6
-
-