Kit Assembly - Metra 99-7619 Instrucciones De Instalación

1. Cut and remove the shaded area
of the brackets for the 2013-Up
Frontier and Xterra. (Figure A)
2. Cut and remove the shaded area of
the brackets for the 2013-up Titan.
(Figure A)
ISO DIN radio provision
1. Clip the brackets into the radio trim
panel. (Figure B)
2. Mount the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips screws supplied. (Figure C)
3. Slide the radio into radio brackets/
pocket assembly and secure with
screws supplied with the radio.
(Figure D)

Kit Assembly

Frontier, Xterra Titan
(Figure A)
Frontier/Xterra bracket configuration shown
(Figure B)
®
99-7619
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
5. For the Titan, mount the new radio
assembly into the dash; for the
Frontier and Xterra, mount the
new radio assembly to the factory
dash panel. Reassemble dash in
reverse order of disassembly.
3
(Figure C)
(Figure D)