Yamaha GRIZZLY Ultramatic YFM660FP Manual Del Propietário página 74

Odometer and tripmeter modes
Pushing the "TRIP/ODO" button switches the dis-
play between the odometer mode "ODO" and the
tripmeter modes "A" and "B" in the following order:
ODO→TRIP A→TRIP B→ODO
To reset a tripmeter, select it by pushing the
"TRIP/ODO" button, and then push the
"TRIP/ODO" button for at least three seconds. The
tripmeters can be used to estimate the distance
that can be traveled with a full tank of fuel. This in-
formation will enable you to plan future fuel stops.
NOTE:
_
Holding in the "TRIP/ODO" button and then turning
the key to "ON" switches the display between
"mph" and "km/h".
_
4-11