Compatible Burners - Sime 1R HE 9 ErP Instrucciones De Instalación Y Mantenimiento

1.5 COMPATIBLE BURNERS
( EN 267)
In general, the oil burner that is compati-
ble with the boiler should use spray
of the semi solid type.
Sections 1.5.2 shows the matching table
of the burners with the boilers have been
tested with.
ATTENTION:
Water heater with Nominal Power Pn
›70kW: It is possible to use burners that
are not on the list but have the same cha-
racteristics, as long as they are confor-
ming to the standard/s, reference techni-
ques and suitable field of work.
Water heaters with Nominal Power Pn
‹70kW: It is possible to use burners that
are not on the list but have the same cha-
racteristics, as long as they are confor-
ming to the standard/s, reference techni-
ques.
When choosing the burner, pay attention
to the max electrical power absorbed by
the burner at 30% of the load and in stand-
by that should be the same or less that
those indicated in the water heater tech-
nical data.
1.5.1 Burners assembly (fig. 4)
The boiler door details is shown in figure
3/a for burner mounting.
The burners must be regulated such that
the CO value is that indicated in point
2
1.3, with a tolerance of ± 5%.
1.5.2 Permanent feeding burners
Model
1R HE 9 ErP SIME MACK 4
26
Code
Type
8099010 DELEVAN
M8
150
Nozzle Atomising
ø angle
0,75 60°W
Pump Class Adsorbed power
pressure NOx consumption
bar
11,0 1 163
Fig. 4
W