Basic Settings; Setting The Language; Setting And Measuring The Wheel Size - VDO X Serie Manual De Instrucciones

GB SLO PL JP

5. Basic settings

5.1 Setting the language

Using the buttons, go to
SETTINGS/SELECT.
Confirm with M .
You are now in setting mode
(pressing C for 3 seconds gets
you back to function mode).
to LANGUAGE SELECT.
Confirm with M .

5.2 Setting and measuring the wheel size

You must set the wheel size (wheel roll circum-
ference) of your bike so that your VDO computer
can measure correctly. There are 2 ways of
doing this:
5.2.1 Setting using tyre table
The common types of tyres are listed in the tyre
table. If your tyre type is not listed, we recommend
entering the wheel size manually.
The values given in the table are approximate
10 X2
to LANGUAGE ENGLISH.
Confirm with M .
ENGLISH SELECT OK? Confirm with M .
LANGUAGE SELECT DONE. The computer automati-
cally returns to the start menu SETTINGS/SELECT.
values. These values differ according to brand, tyre
height and tyre profile. This can consequently also
lead to discrepancies in the distance measured
and the speed shown.
VDO CYCLECOMPUTING
mm-value inch-value
16 x 1,75 1272
20 x 1,75 1590
24 x 1 ⅜ 1948
24 x 1,75 1907
26 x 1 1973
26 x 1,5 2026
26 x 1,6 2051
26 x 1,75 2070
26 x 1,9 2089
26 x 2,00 2114
26 x 2,125 2133
26 x 1 ⅜ 2105
26 x ¾ 1954
27 x 1 ¼ 2199
28 x 1,5 2224
28 x 1,75 2268
28 x 1 ½ 2265
28 x 1 ⅜ 2205
30-622 2149
32-622 2174
37-622 2205
40-622 2224
How to set the tyre size by selecting the tyre:
Using go to SETTINGS/
SELECT. Confirm with M .
You are now in setting mode
(pressing C for 3 seconds gets
you back to function mode).
www.vdocyclecomputing.com
JP PL
50,1
62,6 Using up/down go to
76,7 WHEELSIZE/SET.
75,1 Confirm with M .
77,7
79,8
80,7
81,5 MEASUREMENT/KMH.
82,2 Confirm with M or
83,2 change to MPH.
84,0
82,9
76,9 WHEELSIZE/BIKE 1 (use
86,6 go to setting for bike 2).
87,6 Confirm with M .
89,3
89,2
86,8
84,6
85,6 WHEELSIZE/ TYRE SELECT.
86,8 Confirm with M .
87,6
TYRE SELECT/SELECT.
Now select your tyres using
. Confirm with
The confirmation question appears "Tyresize"/
SELECT OK? When the displayed tyre size matches
the one you want, confirm with M .
The display confirms WHEELSIZE/SET DONE
Automatic return to SETTINGS/SELECT.
SLO GB
to
to
M .
X2 11