GYS GYSPACK AUTO Manual De Instrucciones página 10

Translation of the original instructions
Do not use any charger other than the one
supplied with the machine to charge the
batteries.
Do not operate the device with a damaged
power supply cord or a damaged mains plug.
Never charge a frozen or damaged battery.
Do not cover the device.
Do not place the device near a fire or subject it
to heat or to longterm temperatures exceeding
50°C.
Do not obstruct the cooling vents. Refer to the ins-
tallation section before operating the machine.
The automatic mode of operation and usage
restrictions are explained below in these opera-
ting instructions.
The booster must be stored in a vertical position.
Any other storage position should only be
temporary.
Risk of explosion and fire!
A battery being charged can emit explosive
gas.
• During the charge, the battery must be placed
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery
Connection / disconnection:
• Disconnect the power supply before connec-
10
GYSPACK AUTO / GYSPACK 400
in a well ventilated area.
against short-circuiting.
ting/disconnecting the device to/from the
battery.
EN