Maintenance And Cleaning; Weekly; Daily - Abicor Binzel ABIDRIVE CW Manual Del Usuario

8 Maintenance and cleaning

8 Maintenance and cleaning
Scheduled maintenance and cleaning is a prerequisite for a long life and a trouble-free operation.
Risk of injury due to unexpected start-up
An unexpected start-up of the device can result in very serious injuries.
• Prior to performing work on the system, de-energise the entire system.
• Close off the compressed air supply.
• Close off the gas supply.
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
NOTICE
• The maintenance intervals given are standard values and refer to single-shift operation.
• Maintenance and cleaning work may only be carried out by qualified personnel (in Germany see
• Check the coolant hoses, seals and connections for signs of damage and leaks, if necessary replace.
• Always wear your personal protective equipment when performing maintenance and cleaning work.

8.1 Weekly

The parts of of the ABIDRIVE CW listed below are subject to wear and soiling. This is why these parts must
be subjected to weekly maintenance and cleaning.
Oil all mobile parts and roller bearings with suitable lubricating oil.

8.2 Daily

Check the toothed wheels for abrasion and damage.
EN - 14
DANGER
DANGER
TRBS 1203).
TIG cold wire feeder