Bosch PMF 350 CES Manual Original página 18

18 | English
Accessory
Profile sander
BIM plunge cut saw
blade, wood and
metal
HCS plunge cut saw
blade, wood
Bi-metal plunge
cut saw blade,
hardwood
TC plunge cut saw
blade, metal
BIM plunge cut saw
blade, wood and
metal
HM-Riff segment
saw blade
Diamond-Riff seg-
ment saw blade
HM-Riff delta plate Mortar,
1 609 92A 1G5 | (6.10.15)
Material
Wood,
Pipes/Profile,
Paint,
Varnishes,
Filler,
Metal
Softwood,
Soft plastics,
Plasterboard,
Thin-walled aluminium
and non-ferrous metal
profiles,
Thin sheet metals,
Non-hardened nails and
screws
Wooden materials,
Soft plastics
Hardwood,
Laminated panels
Metal,
Severely abrasive mate-
rials,
Fibreglass,
Plasterboard,
Cement-bonded fibre
boards
Softwood,
Hardwood,
Veneered panels,
Plastic-laminated panels,
Non-hardened nails and
screws
Cement joints,
Soft wall tiles,
Glass fibre reinforced
plastics,
Porous concrete
Cement joints,
Soft wall tiles,
Epoxy resin,
Glass fibre reinforced
plastics
Concrete residues,
Wood,
Abrasive materials
Application
Convenient, efficient sanding of profiles up to a diameter of
55 mm;
Red sanding sheets for sanding wood, pipes/profiles,
varnishes, fillers and metal
Smaller separating and plunge cuts;
example: cutting an opening for sockets, flush cutting a
copper pipe, plunge cuts in plasterboard
Filigree adjustment work in wood;
example: sawing openings for locks and fittings
Separating and deep plunge cuts; also for sawing close to
edges, in corners and hard to reach areas;
example: narrow plunge cut in solid wood for installing a
ventilation grid
Plunge cuts in laminated panels or hardwood;
example: installing skylights
Plunge cuts in severely abrasive materials or metal;
example: cutting kitchen front covers, easy cutting through
hardened screws, nails and stainless steel
Plunge cuts in laminated panels or hardwood;
example: shortening door frames, cutting openings for a
shelf
Cutting and separating close to edges, in corners or hard to
reach areas;
example: removing grouting joints between wall tiles for
repair work, cutting openings in tiles, gypsum boards or
plastic
Precise routing and cutting of tile/joint material, epoxy
resins and glass fibre reinforced plastics;
example: making smaller cutouts in soft wall tiles and
routing openings in glass fibre reinforced plastic
Rasping and sanding on hard surfaces;
example: removing mortar or tile adhesive (e.g. when re-
placing damaged tiles), removing carpet adhesive residues
Bosch Power Tools