5. MACHINE DESCRIPTION
5.1.
CONDITIONS OF USE
The chipper is only designed to shred pieces of wood with a maximum diameter of 6
cm. Itis prohibited to shred any other material (for example metal, stones, plastics and
any other material). If you want to shred roots, remove the sand, mud or other residues
before shredding. Any other use of the shredder not described here, annuls the warranty
responsibility of the manufacturer. Do not use this machine for any other purpose not
intended. The use of this machine for other than the designated operations may result in
dangerous situations. Utilice esta máquina en el exterior, en ambientes secos y
temperaturas entre 5ºC y 45ºC.
Remember that the machine operator is responsible for the dangers and accidents
caused to other people or things. The manufacturer shall not be in any case responsible
for damages caused by improper or incorrect use of this machine.
DETAILED DESCRIPTION OF THE PRODUCT
5.2.
1. Exit chute
2. Entry chute
3. Transport handle
4. Emergency button
5. Muffler
6. Air filter cover
7. Accelerator
8. Petrol deposit stopper
9. Oil deposit stopper
10. On/off switch
11. Starter handle
12. Petrol cutting key
13. Air lever
Images and drawings in this manual are approximate and may not correspond with the actual
product.
1
1
2
7
1
1
3
1
35
/160
6
5
8
1
9
0
4
English
2
3