Fuel And Oil; Filling The Fuel Tank - Blackstone GBK-700 1L Manual Del Usuario

Chipper
Tabla de contenido

Publicidad

Place the security switch as shown in the
diagram over the top of the two chutes
and hold in place using the four screws.
Once in place, tighten the security screws
of the chute and exit tube (fig 1 and fig 2).
6 . 2 . 3 .
MOUNTING THE EMERGENCY
BUTTON

6.3. FUEL AND OIL

IMPORTANT: The fuel used for
this machine is highly flammable.
If the fuel or the machine ignites,
put out the fire with a dry
powder extinguisher.
fig.
2
Petrol and oil are extremely
flammable and explosive under
certain conditions. Do not smoke
and keep flames, sparks or heat
away from the machine.
Use unleaded gasoline 95 octane.
Do not use fuel that has been stored for
longer than 2 months. A fuel stored for too
long will cause the starting of the machine
to be more difficult and result in
unsatisfactory engine performance. If the
fuel
has been in the machine's tank for
longer than two months, empty the tank
and replace it with fuel in perfect
condition.

6.3.1. FILLING THE FUEL TANK

- Choose a suitable area to perform this
operation.
- Remove the fuel tank cap and fill with fuel.
- Tightly close the fuel tank's cap and
remove
spilled with a dry cloth.
WARNING:
Stop the engine before refueling.
Do not start the machine in an enclosed
room or space. The exhaust gases and
fumes from the fuel and oil contain
carbon monoxide and harmful
chemicals.
In case of a concentration of gases
33
/160
English
all the fuel that

Publicidad

Tabla de contenido
loading

Productos relacionados para Blackstone GBK-700 1L

Tabla de contenido