Engine Oil - Blackstone GBK-700 1L Manual Del Usuario

ventilation is sufficient so that does not
happen in this concentration again.
Do not refuel fuel in locations where there
is the presence of open flames, sparks or
heat sources. Fill the tank always in well-
ventilated areas and with the motor
stopped. Not overflow the fuel to overfill the
fuel tank. In the event of a fuel leak be sure
to remove these leaks completely before
starting, move the machine away from the
area of spillage and avoid any source of
ignition until all vapors are gone.
Separate yourself at least 3 meters from
the refueling area before starting the
machine.
Add fuel before starting the machine.
Never remove the cap of the fuel tank
while the engine is running or when the
machine is hot.
Do not use fuels such as ethanol or
methanol. These fuels will damage the
engine of the machine.
6.3.2.

ENGINE OIL

For transportation reasons, your
machine's engine comes from the factory
without any oil in it. Before starting the
engine for the first time you must put oil
the engine.
This engine uses quality
oil for 4-stroke, 20w-40
20W-40 0,6l
viscosity. The
capacity of the crankcase is
0,6 l.
Filling the oil sump:
- Place the machine on a flat,
horizontal and uncluttered
surface.
- Unscrew the oil filler cap.
35
/160
English