Checking The Spark Plug - Blackstone GBK-700 1L Manual Del Usuario

English
- Insert the rod and screw on the oil cap.
- Unscrew the plug again and check
the mark left by oil on the dipstick.
The mark left by the oil must be
between the minimum and maximum
marks.
- If the mark is below the minimum,
add a little more oil and recheck.
- If the mark is above the maximum, you will
have
to remove oil from the crankcase. To
do this, tilt the machine and let out a
little oil (put a container
at the end of the tube to prevent oil
spilling on the machine or the
ground).

8.2.3. CHECKING THE SPARK PLUG

When it comes to starting a machine,
the most common problems are
produced by a dirty spark plug or one in
poor condition. Clean and check the
spark plug regularly.
Check that the electrode gap is
correct (0.6 - 0.7 mm).
46
/160