Blackstone GBK-700 1L Manual Del Usuario página 67

To change the
oil:
- Place the machine on a flat,
horizontal and uncluttered
surface.
Empty the engine oil:
- If it sucks the used oil: remove the
engine oilplug (Y1) and vacuum the
motor oil by inserting the vacuum
cleaner tube (not included with
machine) to the bottom.
- If you choose to empty the drain (Y2)
through the drain plug, please note the
trajectory that the oil will take into the
chassis, place a large container to catch
all of the oil before it spills on the
ground.
- We recommend that you put a big plastic
covering on the area in which you will
change the oil so that oil does not fall on
the ground. Once the work area is
prepared, remove the filling cap (Y1) and
remove the (Y2) oil drain plug and
slightly tilt the machine so that the oil
comes out and falls into the container.
- Once all of the oil has been drained,
put the drain plug back in the machine.
- Empty the engine oil into a suitable
container so that you can carry it to a
proper clean point.
Filling the oil sump:
Y1
- Place the machine on a flat,
horizontal and uncluttered
surface.
Y2
- Unscrew the oil filler cap.
- Insert the filled 0,6 l of oil tube.
- Wait 1 minute for the oil to completely
go
- Clean the dipstick from the oil with a cloth.
Y1
Y2
45
/160
down to the crankcase.
English