Transport; Storage; Recycling And Machine Disposal - Blackstone GBK-700 1L Manual Del Usuario

English

10. TRANSPORT

Never lift or transport the rotary tiller while
the engine is running. It is necessary to
always turn off the engine when
transporting the machine between different
working areas.
Once the machine is turned off, wait 5
minutes to allow it to cool before
transporting it. The machine's exhaust
pipe will remain hot after turning off the
engine.
If you have to raise the machine, check
the weight of the machine in the technical
characteristics before lifting it to ensure
that it is a weight that you can withstand.
Transport of the machine should be carried
out by two persons to avoid possible
injuries.
If you are transporting the rotary tiller in
vehicles, secure it firmly to prevent it
from slipping or tipping over.

11. STORAGE

Once the machine is off, wait 5 minutes
for it to cool down before storing the
machine. The machine's exhaust pipe will
remain hot after turning the engine off. Do
not ever store the machine in places near
flammable materials (dried grass or
wood...), gas or fuels.
Be sure to store the machine in a place not
accessible to children or that it creates
possible danger for anyone and that is dry,
clean and at a temperature between 0° C
and 45° C.
Before storing the machine follow the
directions in the maintenance chapter.
If you plan to store the machine in a closed
place, first empty the fuel. Vapors could
come into contact with a flame or hot body
and ignite. If the fuel tank has to be
emptied, this must be done outdoors and
according to the regulations of recycling.
To reduce the risk of fire, keep the engine,
muffler and fuel tank clean by eliminating
the remains of cut material, oil and grease.
12. RECYCLING AND
MACHINE DISPOSAL
Protect the environment. Recycle this
machine's used oil by taking it to a
recycling center. Do not pour used oil in
drains, land, rivers, lakes, or seas.
Dispose of your appliance
sustainably.We should not get
rid of machines with domestic
waste. Plastic and metal
components can be classified
according to their nature and
recycled.
The materials used to pack this
machine are recyclable. Please
do not throw the packaging
away with domestic trash.
Throw these packages away at
an official collection point.
44
/160
English