Specifications - Sharp EL-945T Manual De Manejo

OVERHEAD PROJECTION SYSTEM
OHP panel controller section:
Power source
Operating time
Power
consumption
Auto-power off
Operating
temperature
External
dimensions
Weight
OHP projection panel section:
Display
Power source
Operating
temperature
External
dimensions
Length of cable
Weight
Accessories: Four AAA dry cell batteries, Lithium battery (Installed in the OHP panel
controller), Communication cable, Carrying case, Operation manual, AC adaptor
EA-28A (included in products for the U.S.A. and Canada, optional for other
areas)
10

2. Specifications

EL-945T OHP panel controller
Main operation: 6V ... (DC): (AAA) dry cell battery × 4
Memory backup: 3V ... (DC): Lithium battery (CR2032) × 1
Operating batteries: Approx. 200 hours (at 20°C (68°F) when usually each
hour is 5 minutes of continuous operation and 55 minutes of display)
• The operating time is approximately 15 hours for the EL-945T OHP panel
controller when either is connected with, and controlling, the OHP
projection panel.
Memory backup battery: Approx. 5 years (if operating batteries are
replaced promptly when depleted.)
• There may be slight differences due to the types of batteries and usage.
0.33 W
Approx. 10 minutes
0°C to 30°C (32°F to 86°F)
76 mm (W) × 163 mm (D) × 34 mm (H)
3-0/32" (W) × 6-13/32" (D) × 1-11/32" (H)
(excluding hard cover)
Approx. 205 g (0.45 lb)
(including batteries and excluding hard cover)
96 × 64 dot matrix LCD
Supplied by the OHP panel controller
(Local voltage: With AC adaptor EA-28A)
0°C to 30°C (32°F to 86°F)
280 mm (W) × 220 mm (D) × 28 mm (H)
11-1/32" (W) × 8-21/32 (D) × 1-3/32" (H) (excluding cable)
Approx. 3 m (9'10-1/8")
Approx. 880 g (1.94 lbs) (including cable)