Intended Use - Hilti VC 20M-X Manual Del Usuario

Ocultar thumbs Ver también para VC 20M-X:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
Additionally in the case of L-class vacuum cleaners
▶ A Dust Class L appliance is suitable for picking up dry, non-flammable dusts, wood chips and hazardous
dusts with an exposure limit value of > 1 mg/m³. The appliance must be equipped with a suitable filter
corresponding to the hazard classification of the dusts to be picked up.
3
Description
3.1
Product overview
3.2

Intended use

The products described here are industrial vacuum cleaners designed for universal, commercial use. They
may be used for wet or dry applications.
Use of the product to clean down persons or animals is not permissible. Underwater use is not permissible.
▶ Before beginning work with the product, find out how to operate it correctly and about any hazards
associated with the materials you will be working with and how these materials can be disposed of safely.
▶ Do not use the product for continuous, stationary operation in automatic or semi-automatic systems.
▶ To reduce the risk of injury, use only genuine Hilti accessories and accessory tools.
▶ Use an anti-static suction hose in order to avoid electrostatic effects.
▶ Do not pick up objects or materials that could cause injury by piercing through the dust bag (e.g. pointed
or sharp objects).
▶ Do not stand on the product (do not use it as a substitute for a ladder).
▶ Observe the accident prevention regulations applicable in your country.
This product is suitable for the following applications in commercial use:
Collecting large quantities of dust from Hilti diamond grinders, cut-off saws, rotary hammers and core
drilling machines using dry-cutting core bits.
Picking up drilling slurry (mineral materials) from Hilti diamond core bits or Hilti diamond saws and liquids
up to a temperature of < 60 °C (140 °F).
Picking up oil or liquid substances up to a temperature of < 60 °C (140 °F).
Wet and/or dry cleaning of wall and floor surfaces
With vacuum cleaners it is necessary to make provision for an adequate rate of air exchange (L) in the room
in situations where the expelled air is returned to the room. Please observe national regulations.
Additionally in the case of M-class vacuum cleaners
Collecting dry, non-flammable dusts, liquids, wood chips and hazardous dusts with an exposure limit value
of ≧ 0.1 mg/m³ (dust class M).
Machines designed for picking up mineral dust containing quartz must correspond to at least dust class M.
22
English
1
Transport handle (extending)
@
Lashing loop for Hilti case
;
Carrying handle
=
Power outlet on the appliance (only XE)
%
Display and control panel
&
Blanking cover for wireless module (optional)
(
Control switch
)
Connection for suction hose
+
Container latch (2 of)
§
Supply cord
/
Securing hook (2 of) with rubber strap
:
Suction head
Waste material container
$
Filter cassette with retainer
£
2268215
*2268215*

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Vc 20l-xVc 40m-xVc 40l-x351495/0056

Tabla de contenido