Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
SPECIFICATIONS
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet
NAIL SELECTION
● Be sure to use only the genuine metabo HPT nails for the NV75AN/NV75AN(S)/NV75AN(S1)/NV75AN(S2).
The use of any other nails can result in tool malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
Wire-collated coil nails
ACCESSORIES
● Accessories other than those shown below can lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
1
10
WARNING
(6 mm)
(2.5 mm)
WARNING
2
3
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
12-21/64" × 12-7/16" × 5-13/64"
(313 mm × 316 mm × 132 mm)
6.3 lbs (2.9 kg)
200 – 300 nails (1 coil)
.085 ft
/cycle at 100 psi
3
(2.4 ltr/cycle at 6.9 bar)
(2.4 ltr/cycle at 7 kgf/cm
3/8 NPT Thread
Min.
.236"
.099"
NV75AN, NV75AN(S), NV75AN(S1), NV75AN(S2)
1 Eye protection ..........................................................1
NV75AN, NV75AN(S)
2 Nose cap ..................................................................1
NV75AN, NV75AN(S1)
3 Sequential actuation trigger kit .................................1
)
2
)
2
Max.
.283"
(7.2 mm)
.131"
(3.3 mm)
Publicidad
Tabla de contenido
