Rds (Radio Data System) - Teac AG-D8900 Manual Del Usuario

AUDIO OPERATIONS
PRESET Channel Cancel
1
POWER ON
1. Select the TUNER function.
2. Select the AM or FM by pressing the BAND selector
button.
3. Press the MODE button to change to the PRESET
mode. (The PRESET CH. indicator lights on the
display.)
4. Select the PRESET channel to be deleted by using
the TUNING/PRESET UP or DOWN button.
5. Press and hold numeric button "0" for longer than 2
seconds.
(The selected PRESET channel will be deleted.)
Recalling Frequencies
Press the numeric key(s) corresponding to the channel
number to tune directly to a broadcast.
Using the Memory Scan function
When the MEMORY SCAN button on the remote control
unit is pressed, the preset channels in which
frequencies in the band (AM or FM) selected have been
stored are scanned at 5-second intervals. When you
hear a broadcast you want to listen to, release the
Memory Scan function by pressing the MEMORY SCAN
button again.
"Back-up" memory function
This function conserves the already preset station
memories, and "Most-recent" memory function, even in
the event of a cut-off of power supply, as when the plug
is pulled out of the wall outlet, for 7 days.
RDS is a broadcasting service which allows stations to
5 2
send additional information along with the regular
radio program signal RDS services can be received
only in FM band.
3 4
1. Select the TUNER function.
2. Press the BAND button to select FM.
3. Select the RDS broadcasting by use of the MODE
4. Press the RDS MODE button.
(1) PS mode
– 14 –

RDS (Radio Data System)

RDS Display
1 4
POWER ON
button and the TUNING/PRESET buttons.
The RDS indicator lights in the display.
This unit receives and displays the following kinds of
data.
PS (Program Service Name): Displays FM station
name.
PTY (Program Type): Program type will be displayed
while receiving FM.
RT (Radio Text): Displays the news of stations
composed of up to 64 symbols.
CT (Clock Time): Displays the information about
times provided from the station.
TP (Traffic Program)
TA (Traffic Announcement)
Each time you press the button briefly (0.5 sec or
less), the modes will change as follows regardless of
the current mode.
T PS T CT T PTY T RT T TA T RDS off
When you select PS with the RDS MODE button,
"PS" will blink for about 4 seconds.
After 4 seconds, PS or a station name will be
displayed.
2 3 3