Playing Surround Sound - Teac AG-D8900 Manual Del Usuario

Playing Surround Sound

DOLBY PRO LOGIC Surround
7 1
4,6
POWER ON
: Video signals
: Audio signals
Balancing Relative Volumes among Speakers
1. Press the DOLBY PRO LOGIC button.
2. Set the MASTER VOLUME control to the normal
listening level.
3. Press the CENTER MODE button to select the center
speaker mode you desire, NORMAL, WIDE or
PHANTOM mode.
4. Press the TEST TONE button to send the test tone
signal to each speaker in succession as shown
below.
T Lch T Cch T Rch T Sch
When the PHANTOM mode is selected in step 3:
T Lch T Rch T Sch
5. Adjust the CENTER LEVEL and REAR LEVEL controls
so that test tone volumes are equal on all speakers.
6. Press the TEST TONE button to cease testing.
Adjusting the Delay Time
7. Play the video software with the DOLBY SURROUND
mark on the component corresponding to the
FUNCTION selected.
8. Adjust the delay time as desired in 3 steps by
pressing the DELAY TIME button:
T15ms T20ms T30ms
20msec is standard.
2,9
3 8 5
VIDEO 1
VIDEO 3 (2CH)
7
Playing Surround Sound
9. Adjust the MASTER VOLUME control for the most
appropriate overall volume.
DOLBY 3 STEREO
7 1
POWER ON
: Video signals
: Audio signals
Balancing Relative Volumes among Speakers
1. Press the DOLBY 3 STEREO button.
2. Set the MASTER VOLUME control to the normal
listening level.
3. Press the CENTER MODE button to select the center
speaker mode you desire, NORMAL or WIDE mode.
4. Press the TEST TONE button to send the test tone
signal to each speaker in succession as shown
below.
T Lch T Cch T Rch
5. Adjust the CENTER LEVEL controls so that the center
speaker sound level is equal to that of the left
speaker and then to that of the right speaker.
6. Press the TEST TONE button to cease testing.
Playing Surround Sound
7. Play the video software with the DOLBY SURROUND
mark on the component corresponding to the
FUNCTION selected.
8. Adjust the MASTER VOLUME control for the most
appropriate overall volume.
– 21 –
2,8
4,6 3 5
VIDEO 1
VIDEO 3 (2CH)
7