Playing Audio Sources - Teac AG-D8900 Manual Del Usuario

AUDIO OPERATIONS
How to Search For Your Desired Program
Using PTY Search
1 3
POWER ON
1. Select the TUNER function.
2. Press the BAND button to select FM.
3. Press the RDS MODE button for longer than 2
seconds.
Then "PTY SEEK" will be shown in the display.
4. Select the desired PTY mode by using the
TUNING/PRESET (‡/°) buttons.
Select your desired one from among 31 kinds of PTY
programs. (The program will blink.)
5. Press the MEMORY button.
The program indicator is changed to light steadily.
6. Press the TUNING/PRESET UP (°) or DOWN (‡)
button. (Searching will start.)
When the PTY mode that you have selected is
searched, searching will stop and the PTY mode will
be displayed.
If the same program type is not found during PTY
Search, it will stop at the beginning frequency.
If you want to cancel PTY search while searching,
press the RDS MODE button. Searching will stop and
search mode will be released automatically.
5 2 4,6
– 16 –

Playing Audio Sources

Listening to Records, Compact Discs, MDs
or Tapes
1
Source
Indicator Lit
POWER ON
Turntable
or
2
CD Player
1. Turn the FUNCTION (source) selector corresponding
to the Audio source (PHONO, CD, MD/TAPE 1) to be
played.
2. Operate the selected audio component for playback.
Playing TAPE 2 Deck
1
POWER ON
Tape Deck 2
1. Set the TAPE 2 MONITOR button to ON; the TAPE
monitor indicator will appear in the display.
2. Operate tape deck (TAPE 2) for playback.
MD Deck
or
2
Tape 1 Deck
TAPE
Indicator Lit
2