Network Settings - Grundfos CIM 500 Instrucciones De Instalación Y Funcionamiento

Network Settings

This web page is used to configure the network settings of the webserver and of the GENIpro TCP protocol.
The network settings here are also used for BACnet IP. Additional configuration of BACnet IP is done in the
Real Time Ethernet Protocol menu. See
Fig. 8 Network settings
Object Description
Configuration of the static IP address if a DHCP server is not used.
IP Address
Default: 192.168.1.100.
Configuration of the subnet mask if s DHCP server is not used.
Subnet Mask
Default: 255.255.255.0.
Configuration of the gateway address if s DHCP server is not used.
Gateway
Default: 192.168.1.1.
The module can be configured to use a specific domain name
DNS Server if available on the network.
Default: 0.0.0.0.
The module can be configured to automatically obtain the IP address from a DHCP
Use DHCP server, if available on the network.
Default: Do not use DHCP.
EtherNet/IP configuration.
server,
191