Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
Loosen the fastening screw (3) of the handle (1) and remove it.
•
attach the handle (1) to the body of the appliance, taking care to assemble it correctly [Fig.
En
B1].
•
Insert the fastening screw (3) and tighten it clockwise [Fig. B2] using a screwdriver.
•
Insert the connector (7B) in the combination brush (7). It will click into place when it is
assembled correctly [Fig. B3].
•
attach the combination brush (7) to the suction connection (6) [Fig. B4].
•
Put the various accessories (10B+10C+10d) on the accessory support 10a [Fig. B5].
•
Secure the accessory support (10a) by pressing it gently into place on the back of the stick
body [Fig. B6].
Your appliance is equipped with the following attachments:
•
combination brush (7): The combination brush (7) is suitable for all of the following
surfaces: hard in position
•
set oF accessories (10):
•
accessory Support (10a): to store the accessories and attach them to the body of
the stick.
•
dusting nozzle (10B).
•
Nozzle for crevices (10C): to clean corners and slots, such as radiators, skirting
boards and blinds.
•
Upholstery nozzle (10d): to clean sofas, armchairs, upholstered chairs and
curtains.
uSInG IT AS A STICK vACuum CLEAnER
Fully unwind the power cable (4). To do so, turn the upper cable hook (2a) downwards [FIG. C1].
warninG! Do not use this appliance if there are visible
signs of damage.
warninG! Do not use this applaince to vacuum:
•
burning ashes, cigarette butts, etc.;
•
liquids, such as carpet cleaners;
•
sharp or hard objects, such as nails or large glass shards;
•
fine powder, such as cement;
•
toner powder (for laser printers, copy machines, etc.).
nOTE: using the vacuum cleaner with the cable fully or partly wound involves an
overheating hazard!
12
assemBly
ACCESSORIES
. In position
USE
it is suitable for all other surfaces.
Publicidad
Capítulos
Tabla de contenido
