Cleaning And Maintenance - Imetec Duetta++ 8078 Manual Del Usuario

Escoba eléctrica con miniaspiradora manual

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

nOTE:

Bear in mind that a new appliance can develop odours the first few times it is

used. these odours are harmless and disappear shortly afterwards. ventilate

the room.

transparent parts can become opaque, due to use.

•

Insert the plug into the socket, while holding the appliance by the handle to prevent it from falling

in the event that it was not stored in the OFF position.

•

Press the ON/OFF button (9) once to switch the vacuum cleaner on or off.

•

Switch the appliance off after use, by pressing the ON/OFF button (9) and disconnect the plug

from the socket.

•

Wind the cable (4) round the two hooks (2a and 2B) [Fig. d1]. With the clamp on the plug, it is

possible to secure it to the cable.

uSInG IT AS A mAnuAL mInI-vACuum

•

Fully unwind the power cable (4). To do so, turn the upper cable hook (2a) downwards [Fig. C1].

•

detach the mini-vacuum (8) from the body of the stick by pressing the release buttons (5) [Fig.

d1].

•

attach the suitable accessory (10) for the surface requiring cleaning and connect it to the mini-

vacuum [Fig. d2].

•

Press the ON/OFF switch (9) once to turn the vacuum cleaner on, and start cleaning.

•

When you have finished, press the ON/OFF switch (9) to turn it off and take the plug out of the

power socket.

•

Put the mini-vacuum (8) back on the body of the stick vacuum and press the handle of the mini-

vacuum until the click tells you that it is correctly in place [Fig. d1].

•

Wind the cable (4) round the two hooks (2a and 2B) [FIG. C1]. With the clamp on the plug, it is

possible to secure it to the cable.

warninG! always disconnect the appliance from the mains

supply before cleaning or performing maintenance.

caution! periodicaly verify that filters and the inlet opening

are not clogged.

caution! Do not use solvents or other aggressive or

abrasive detergents in order not to damage the appliance

surfaces.

warninG! make sure all cleaned parts are completely dry

before reusing the appliance.

CLEANING THE APPLIANCE

•

When necessary, clean the appliance with a damp cloth.