Incoming Calls - Topcom SOLOGIC B921 Manual Del Usuario

Operating the telephone
Redialling the last telephone number called
Redialling one of the last 3 telephone numbers called

4.3 Incoming calls

When an incoming call is received, the handset and the base station
ring and the visual call signal LED (see point 14 in figure 3C and
point 17 in figure 3D) flashes on the handset and base station.
4.4 Activating/deactivating hands free mode
You can use this function to answer a call without having to hold the
handset or if the a call is already being conducted on the handset.
During the call:
Important The batteries discharge more quickly if you use
16
The telephone number is automatically dialled.
3 Press the hang up key to end the call.
1 Press the call button.
2 Press the redial button.
The last telephone number is automatically dialled.
3 Press the hang up key to end the call.
1 Press the redial key.
The last number called appears in the display.
If you want to redial one of the last 3 numbers, keep
pressing the redial key until the number you want
appears in the display.
2 Press the call button.
The telephone number is automatically dialled.
Press the hang up key to end the call.
3
1 Press the answer call key to answer the call.
2 Press the hang up key to end the call.
1 Press the hands free key to activate the function.
2 Press the hands free key again to switch the call
back to the handset.
hands free mode for a long time!