De-Registering A Handset From The Sologic B921 Base Station - Topcom SOLOGIC B921 Manual Del Usuario

6.2 De-registering a handset from the Sologic B921 base
station
OK
OK
4 5 6
G J M
H K N
I L O
OK
OK
4 5 6
G J M
H K N
I L
O
Important Handsets can only be de-registered when they are
6.3 Selecting a base station
If your handset is registered to more than one base station (max. 4),
you must select one of these base stations since the handset only
communicates with one base station at a time. There are two options:
Auto Select
If you set the handset to 'Auto Select', the handset will
automatically search for the nearest base station in standby mode.
OK
OK
OK
OK
Info
1 Press the menu/OK key.
2 Select "DE-REGISTER" and confirm.
3 Enter the PIN code of the base station (default
0000).
4 Enter the internal number of the handset you want to
de-register (1-4) and confirm.
Once the handset has been successfully de-
registered, it reverts to standby mode. Otherwise you
will be asked to enter the handset number again.
not in use.
1 Press the menu/OK key.
2 Select "HANDSET" and confirm.
3 Select "SELECT BASE" and confirm.
4 Select "AUTOMATIC" and confirm.
If you allow the base station to be selected
automatically and the handset goes out of range of
the current base station, the handset will only
search for the strongest base station in standby
mode (not during a call).
Registering and de-registering a handset
25