Publicidad
Service information
Maintenance of a medical device is wholly the responsibility of the owner of that device. Failure to maintain a device in accordance
with the instructions may invalidate the device's warranty. Furthermore, failure to maintain a device may compromise the clinical
condition or safety of users and/or their caregivers. Do not perform service and maintenance while the user is in the product.
Contact local dealer for assistance, if needed, in setting up, using or maintenance of the device.
1st Day
EN
•
Read the User Guide carefully before use and store it in
a safe place for future reference.
Daily
•
Use a dry cloth to clean the product
•
Visual inspection. Repair or replace any damaged or
worn-out parts
•
Ensure that all fasteners are in place and fitted
correctly
•
Be aware of any MAX mark indications before
adjustment
•
Check that all cables connecting the power system are
in good shape
Weekly
•
Check that all wheels are moving freely and that all
wheel locks/brakes are easily activated
•
Wipe off any residue and dirt from the product using a
cloth with warm water and a mild detergent/soap and
dry before use
Monthly
•
If equipped with airfilled tyres, check the air pressure
•
All nuts and bolts on this product must be checked and
tightened to avoid unnecessary failures
•
Oil the swing-away parts. We recommend you use a
professional lubricant system
Annually
•
Inspect the frame for cracks or signs for worn-out parts
and carry out annual service. Never use a product
which appears to be substandard or faulty
•
It is recommended to check the handset and cable for
damage and holes caused by violent handling at least
once a year
Warewashing machine
Before washing remove the following items and clean them
separately:
•
Power Unit, Seat and Accessories
Do NOT clean the power unit with a high pressure cleaner or
steam cleaner.
This product can be washed at 60° using a mild detergent
for 10 minutes in a washing machine designed for medical
devices. Use the machine's drying function to dry the product.
After washing:
•
Install the power unit, seat and accessories.
•
Check that the handset functionalities works correct
Disinfection
The product can be disinfected with a 70% disinfectant IPA
solution. It is recommended to wipe off any residue and
dirt from the product, using a cloth with warm water and a
mild detergent/soap without chlorine and let it dry before
disinfection.
Service interval
A detailed inspection of the product must be made every 12
months (every 6 months if the product is used very often
- daily use for more than 7 hours), every time the product
is reissued for use and after a long term storage (more
than 4 months). The inspection should be carried out by a
technically competent person who has been trained in the
use of the product.
The lifetime of this product in normal use is 8 years if all
maintenance and servicing is carried out in accordance with
the manufacturer's instructions and demonstrably recorded.
The device may be reissued within its lifetime
Service Check List:
Check and adjust the following functions as per their
intended use. Repair or replace any damaged or worn-out
parts. Please check the:
•
Frame is adjustable in height
•
Powered versions are able to retain power after
charging the battery
•
On outdoor versions, the push-brace can be folded over
the frame
•
If equipped with airfilled tyres, check the air pressure
•
Seat plane adjustment. The seat plane is adjustable
and stays in position after adjustment.
•
Wheels are moving freely and that all wheel locks/
brakes are easily activated. Adjust if required
•
Nuts and bolts on the product are tightened
•
Oil the swing-away parts
•
Product for cracks or signs for worn-out parts
•
All labels on the product are intact
Materials
The following surface treatment processes were used to
protect against corrosion:
•
Lacquered surfaces = Polyester powder coating or
ED-coating
•
Non-lacquered aluminium parts = Anodized coating
•
Non-lacquered steel surfaces = Galvanized
Power unit
For an optimum lifetime the power unit must be connected
to the mains voltages as often as possible (e.g. every night).
Charge the batteries 12 hours before use.
The batteries must be charged at least every 3rd month -
otherwise there might be damages due to self-discharge. It
is recommended to test the battery function at least once
every year.
Recharging the battery:
•
Remove the plug from the power system and plug in the
charging lead
•
Plug the charger into the electricity supply and switch
ON. A yellow light on the charger will light up
•
Charge the batteries until the lamp on the charger
turns green
50
Publicidad
