Emerson Blade Select Serie Manual Del Usuario página 14

5. How to Wire Your Ceiling Fan
5.5
Screw the Two Threaded Studs (supplied) into the
Tapped Holes in the Hanger Bracket (Figure 19).
5.6
Lift the Ceiling Cover up to the Threaded Studs and turn
until Studs protrude through the Holes in the Ceiling Cover
(Figure 20).
Secure the Ceiling Cover in place by sliding Lockwashers
over the Threaded Studs and installing the Two Knurled
Knobs (supplied). (Figure 20).
Tighten the Knurled Knobs securely until the Ceiling Cover
fits snugly against the Ceiling and the Hole in the Ceiling
Cover is clear of the Downrod.
WARNING
!
To avoid possible fire or shock, make sure that the electrical
wires are completely inside the outlet box and not pinched
between the ceiling cover and the ceiling.
THREADED
STUDS (2)
Figure 19
Figure 20
14
(Continued)
CEILING
COVER
THREADED
STUDS (2)
LOCKWASHERS (2)
KNURLED KNOBS (2)