Emerson Blade Select Serie Manual Del Usuario página 16

6.3
The Switch Housing Assembly Connector and the Motor
Hub Connector are Keyed and Color-Coded and must be
mated correctly (same color-to-color) before they can be
engaged.
Engage the Connector of the Switch Housing Assembly
with the Motor Hub Connector (Figure 23).
Make sure the Connector Latch closes properly.
6.4
Tuck all the Wires and Connectors into the Switch Housing
Adapter.
Align the Three Screw Holes of the Switch Housing
Assembly.
Secure the Switch Housing Assembly to the Switch
Housing Adapter using the Three #6-32 x 3/8" Flat Head
Screws (supplied in parts bag) (Figure 24).
6. Final Assembly
(Continued)
SWITCH
HOUSING
ADAPTER
MOTOR HUB
CONNECTOR
SWITCH HOUSING
COVER CONNECTOR
SWITCH HOUSING
ASSEMBLY
Figure 23
Figure 24
16
#6-32 x 3/8" FLAT
HEAD SCREWS (3)
SWITCH HOUSING
ASSEMBLY