Programming The Playing Order Of The Tracks -Program Play - JVC CA-HXZ9 Manual Del Usuario

Programming the Playing Order of the Tracks
—Program Play
You can arrange the playing order of the tracks before you
start playing. You can program up to 32 tracks.
• To use Repeat Play (see page 18) for Program Play, press
REPEAT after starting Program Play. Only REPEAT 1 and
REPEAT ALL can be selected for Program Play.
• There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step 2 again.
1
Load discs.
• If the current playing source is not the CD player, press
CD 3¥8, then 7 before going to the next step.
2
Activate the Program Play mode.
On the unit:
Press CD PLAY MODE repeatedly
until "CD PROGRAM" appears on
the display.
• Each time you press the button, the play
mode changes as follows:
CD PROGRAM
Canceled
(Continuous Play)
On the remote control:
Press PROGRAM so that
"CD PROGRAM" appears
on the display.
• The PRGM (program) indicator lights up on the display.
If a program has been stored in memory, the program is
called up.
3
Press one of the disc number
(CD1, CD2, or CD3) buttons
to select the disc you want to
play.
Disc number
CD PLAY
MODE
CD RANDOM
PROGRAM
P R G M
CD3
CD2
CD1
Track number
P R G M
Program step number
4
Select a track from the selected
disc in step 3 .
On the unit:
Turn 4 / ¢ to select the
track number, then press
SET/DISPLAY.
On the remote control:
Press the number buttons.
• For how to use the number
buttons, see "To go to another
track directly using the number
buttons" on page 15.
5
Program other tracks you want.
• To program tracks from the same disc, repeat step 4 .
• To program tracks from a different disc, repeat steps 3
and 4 .
6
Press CD 3¥8.
The tracks are played in the order you
have programed.
To stop playing, press 7.
To exit from Program Play mode, press CD PLAY MODE
repeatedly until the PRGM (program) indicator goes off (or press
PROGRAM on the remote control) after playback stops.
• If you try to program a 33rd track, "CD FULL" will appear on the
display.
• If you have tried to program a track from an empty tray, "NO
DISC 1," "NO DISC 2," or "NO DISC 3" will appear on the
display for about 2 seconds.
• If the track number you have programed does not exist on the
disc, it will be skipped during play.
Continued
SET /
DISPLAY
1 2 3
4 5 6
7 8 9
10 10
CD
16