Rear-Facing Installation; Lap-Shoulder Belt Installation (Preferred Method) - Britax ADVOCATE Guia Del Usuario

Britax Child Safety, Inc.

Rear-Facing Installation

Lap-Shoulder Belt Installation (Preferred Method)

1. Open the CLICKTIGHT.
a. Press the dimple on
the CLICKTIGHT dial.
b. Rotate dial clockwise
until CLICKTIGHT
releases and lift to
open.
2. Attach the anti-rebound
bar, if included (see page
28).
3. Recline the unoccupied
child seat and place rear
facing on the vehicle seat.
NOTE: Ensure that no
more than 3 in. (7.5 cm)
of the base hangs over
the edge of the vehicle
seat (see page 27).
4. Slide both the lap and
shoulder parts of the
vehicle belt into the rear-
facing belt slots.
5. Buckle the seat belt.
NOTE: Ensure the vehicle
belt is not twisted.
6. Remove slack from the
lap part (a), then the
shoulder part (b) of the
vehicle belt.
8
1a
6b
6a
Table of Contents
1b
3"