Temperature Setting; Child Lock; Cleaning And Storage - Suntec Wellness Klimatronic Heat Prime Manual De Instrucciones

Tabla de contenido

Publicidad

Press the button to choose LO, HI or Anti-Frost mode.
MODE:
1)
LO: the unit runs in low power, the display shows the LO symbol and the set temperature.
2)
HI: the unit runs in high power, the display shows the HI symbol and the set temperature.
3)
Anti-Frost Modus: By using the anti-freeze function of Heat Prime, you can prevent the frost formation in
an unheated room which is not used in the winter for a long time. In this mode, the device maintains a
constant room temperature of 7 ° C and thus protects the room from the cold damage. After pressing the
appropriate button the display will show the temperature of 7 ° C and the

TEMPERATURE SETTING:

1)
Choose the LO or HI mode.
2)
Press the buttons
TIMER: You can set the wishful off-time:
Press the button to activate the timer function
1)
2)
Press the buttons
3)
The display will show the
4)
Once the set time has expired, the unit automatically switches off.
Press the button to activate or deactivate the oscillation of the heater
OSC:
CHILD LOCK: press and hold
control pannel lights up the
All functions can be enabled using the control panel or remote control

CLEANING AND STORAGE

Before cleaning the unit turn the power off by pressing the POWER button, wait a few minutes and
then unplug the power cord from the outlet.
Clean the unit using a damp cloth, and then wipe it using a dry cloth.
Do not use chemical solvents (such as gasoline, alcohol). The surface and the entire housing
could be damaged.
Gently remove the cover, than remove the air filter.
Rinse the filter under running water and dry it with a soft cloth.
We recommend to clean the unit once a month.
If you do not use the unit for a longer time period, so please turn it off; unplug the power cord and
store the unit in a dry, cool and safe place.
Do not expose the unit to direct sunlight.
Remove the batteries from the remote control and keep them safe.
and
to adjust the temperature.
and
to adjust the quantity of hours.
symbol and the set tine / set temperature alternately.
and
for 5 seconds for activate or deactivate the child lock function.On the
symbol; the display shows "[ ]".
(0-24).
.
.
symbol.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido